Installing remote.it on the nVidia Jetson with Ubuntu

Warning

Please note that this section describes a software package which has been superseded. We do not recommend the use of remoteit 3.x for new designs.  For instructions on downloading and installing the most recent device package, please follow this link.

Info

These instructions were tested with a Jetson Nano 2GB Developer Kit and Ubuntu 18.04.5 LTS.

We recommend that you perform these actions at the command prompt.

Update your packages list

Update your packages list using:

sudo apt update -y
Confirm that curl and jq are installed
sudo apt install curl
sudo apt install jq
Get the latest version of Node

As with any Node.js application on Ubuntu the Node version in the Ubuntu or Debian repository is VERY old so you will have to execute this command first to add the correct repository to your system (this one is for Node.js v12)

curl -sL https://deb.nodesource.com/setup_12.x | sudo -E bash -
sudo apt-get install -y nodejs
Download and verify the remoteit Debian arm64 package
curl -LO https://downloads.remote.it/linux/latest/deb/jetson/remoteit_arm64.deb
md5sum remoteit_arm64.deb

Confirm that the displayed md5 checksum matches the value displayed on the downloads page.

Install remoteit

Install the remoteit package with:

sudo apt install -y ./remoteit_arm64.deb

Configure your Device with remote.it

Now that remoteit is installed, jump to this page to learn how to configure your Device and add Services to it.

 

Was this article helpful?
0 out of 0 found this helpful