If you are using Raspbian Buster, follow the instructions below.
The following instructions assume you have access to a command line on your Pi (using a keyboard and monitor, or over your LAN using SSH) as well as having established a network connection, either using Wi-Fi or Ethernet.
On the Raspberry Pi command line, type or copy and paste the following commands and press the "Enter" key.
sudo apt update
sudo apt install remoteit
Each of these commands will take less than a minute to complete as they download required files. When the process is done, you will see this message displayed. The details of alternate connection addresses will depend on your network.
Continue your device configuration at
Now go to a browser and type find.remote.it into the URL bar and hit the "Enter" key.
If you're using the Pi's GUI directly, you can use the Pi's browser.
If you're connected to the Pi using SSH over the LAN, you can copy the URL to a browser on your local PC.
Now you can access the remoteit web Admin Panel following the instructions here.
If find.remote.it does not work, try one of the alternate addresses shown when the installation completed.
Updating the remoteit package
We recommend connecting locally, if possible, when updating existing devices.
When upgrading a remote system, you should use the following command:
nohup sudo apt install remoteit &
Upgrading from connectd
You can install the remoteit Raspbian package over a previous installation of the older connectd package, version 2.4.26 or later. Your services and startup scripts will be converted automatically.
Upgrading over connectd ONLY works for Services registered using connectd_installer or connectd_register. Do NOT install remoteit over connectd if you have registered Services using Bulk or Auto Registration.